Even as Federal Reserve policymakers seemed unsure of the immediate direction of the global economy, debating whether disinflation could be an issue in the short term at their meeting March 18-19, most of them expected inflation would return to 2 percent in the next few years, according to minutes of the gathering released April 9.
But just when within the next two years inflation would start rising has been a point of debate, and the fact that producer prices exceeded economist expectations this week reinforced the idea that policymakers, for all their good intentions, may not time interest rates correctly to contain runaway inflation, as historically has been the case.
And this situation also clearly calls for the need to have investments that can simultaneously enhance earnings and protect against inflation, which can appear more suddenly than policymakers have forecasted. Energy infrastructure or midstream Master Limited Partnerships (MLPs) can deliver this investment flexibility, offering investors exposure to the shale boom or commodity price rises, tax benefits, and most MLPs’ contracts are protected against the producer price increases we saw this month.
The prices businesses receive for their goods and services rose in March, defying a long stretch of subdued inflation across the U.S. economy, according to the Wall Street Journal. The producer price index for final demand, which measures changes in prices for everything from food and machinery to warehousing and transportation services, rose a seasonally adjusted 0.5% from February, the Labor Department reported on April 11. The index rose 0.6%, excluding the volatile categories of food and energy.
Economists surveyed by the Wall Street Journal had expected the index to rise a more modest 0.1%, and predicted a 0.2% increase excluding food and energy. The index fell 0.1% in February, unchanged from the Labor Department’s initial estimate. The PPI for final demand was up 1.4% in March from a year earlier! , the biggest year-over-year increase since last August.
The PPI measures the prices businesses receive from buyers such as governments, consumers and other businesses. The Labor Department overhauled the report this year to measure a much broader swath of the U.S. economy.
Top 5 Tech Stocks For 2015: IDEX Corp (IEX)
IDEX Corporation (IDEX), incorporated on September 24, 1987, is an applied solutions business that sells an array of pumps, flow meters and other fluidics systems and components and engineered products to customers in a variety of markets worldwide. All of the Company�� business activities are carried out through wholly owned subsidiaries. IDEX operates in three business segments: Fluid & Metering Technologies, Health & Science Technologies and Fire & Safety/Diversified Products. Reporting units in the Fluid & Metering Technologies segment consist of Banjo; Energy and Fuels (Energy); Chemical, Food & Process (CFP) and Water & Waste Water (Water). Reporting units in the Health & Science Technologies segment consist of IDEX Health & Science (IH&S); IDEX Optics and Photonics (IOP); Precision Polymer Engineering (PPE); Gast; Micropump and Materials Process Technologies (MPT). Reporting units in the Fire & Safety/Diversified Products segment consist of Fire Suppression; Rescue Tools and Band-It. In July 20, 2012, it acquired Matcon Group Limited. In March 2013, it announced the acquisition of FTL Seals Technology, Ltd. On April 11, 2012, the Company acquired the stock of PPC. On April 30, 2012, the Company acquired the stock of ERC.
Fluid & Metering Technologies Segment
The Fluid & Metering Technologies Segment designs, produces and distributes displacement pumps, flow meters, injectors, and other fluid-handling pump modules and systems and provides flow monitoring and other services for the water and wastewater industries. Fluid & Metering Technologies pump and metering solutions serve a range of end markets, including industrial infrastructure (fossil fuels, refined and alternative fuels, and water and wastewater), chemical processing, agricultural, food and beverage, pulp and paper, transportation, plastics and resins, electronics and electrical, construction and mining, pharmaceutical and bio-pharmaceutical, machinery and other markets. Fluid & Metering Technologies accounte! d for 43% of IDEX�� sales and 82% of IDEX�� operating income, with approximately 46% of its sales to customers outside the United States as of December 31, 2012, with approximately 46% of its sales to customers outside the United States. Banjo is a provider of pumps, valves, fittings and systems used in liquid handling. Banjo is based in Crawfordsville, Indiana and its products are used in agricultural and industrial applications. Approximately 11% of Banjo�� sales during 2012 were to customers outside the United States.
Energy consists of the Company�� Corken, Faure Herman, Liquid Controls, S.A.M.P.I. and Toptech businesses. Energy is a supplier of flow meters, electronic registration and control products, rotary vane and turbine pumps, reciprocating piston compressors, and terminal automation control systems. Energy has facilities in Longwood, Florida and Zwijndrech, Belgium (Toptech products), Oklahoma City, Oklahoma (Corken products), La Ferte Bernard, France (Faure Herman products), Vadodara, Gujarat, India (Liquid Controls products), and Altopascio, Italy (S.A.M.P.I. products). Applications for Liquid Controls and S.A.M.P.I. positive displacement flow meters, electronic, registration and control products include mobile and stationary metering installations for wholesale and retail distribution of petroleum and liquefied petroleum gas, aviation refueling, and industrial metering and dispensing of liquids and gases. Corken products consist of rotary vane pumps, single and multistage regenerative turbine pumps, and small horsepower reciprocating piston compressors. Toptech supplies terminal automation hardware and software to control and manage inventories, as well as transactional data and invoicing, to customers in the oil, gas and refined-fuels markets. Faure Herman is a supplier of ultrasonic and helical turbine flow meters used in the custody transfer and control of fluids and gases. Approximately 53% of Energy�� sales during 2012 were to customers outside the United State! s.
!
CFP consists of the Company�� Richter, Viking and Warren Rupp businesses. CFP is a producer of air-operated and motor-driven double-diaphragm pumps and replacement parts, lined pumps, valves and control equipment for the chemical, fine chemical and pharmaceutical industries, and external gear pumps. Richter�� corrosion resistant fluoroplastic lined products offer solutions for applications in the process industry. Viking�� products consist of external gear pumps, strainers and reducers, and related controls used for transferring and metering thin and viscous liquids sold under the Viking and Wright Flow brands and air-operated double-diaphragm pumps sold under the Blagdon brand. Markets served by Viking products include chemical, petroleum, pulp and paper, plastics, paints, inks, tanker trucks, compressor, construction, food and beverage, personal care, pharmaceutical and biotech. Warren Rupp products (which also include Pumper Parts and Versa-Matic products) are used for abrasive and semisolid materials, as well as for applications where product degradation is a concern or where electricity is not available or should not be used. Markets served by Warren Rupp products include chemical, paint, food processing, electronics, construction, utilities, mining and industrial maintenance. CFP maintains operations in Kampen, Germany (Richter products), Cedar Falls, Iowa (Richter and Viking products), Eastbourne, East Sussex, England, Shannon, Ireland (Viking products) and Mansfield, Ohio (Warren Rupp products). CFP primarily uses independent distributors to market and sell its products. Approximately 54% of CFP�� sales during 2012 were to customers outside the United States.
Water consists of the Company�� ADS, IETG, iPEK, Knight and Pulsafeeder businesses. Water is a provider of metering technology and flow monitoring products and underground surveillance services for water and wastewater markets, as well as a manufacturer of pumps and dispensing equipment for industrial laundries! , commerc! ial dishwashing and chemical metering, and a provider of metering pumps, special-purpose rotary pumps, peristaltic pumps, fully integrated pump and metering systems, custom chemical-feed systems, electronic controls and dispensing equipment. ADS�� products and services provide integrated solutions that enable industry, municipalities and government agencies to analyze and measure the capacity, quality and integrity of wastewater collection systems, including the maintenance and construction of such systems. IETG�� products and services enable water companies to manage their water distribution and sewerage networks, while its surveillance service specializes in underground asset detection and mapping for utilities and other private companies. iPEK supplies remote controlled systems used for infrastructure inspection. Knight is a manufacturer of pumps and dispensing equipment for industrial laundries, commercial dishwashing and chemical metering. Pulsafeeder products are used to introduce precise amounts of fluids into processes to manage water quality and chemical composition, as well as peristaltic pumps. Its markets include water and wastewater treatment, oil and gas, power generation, pulp and paper, chemical and hydrocarbon processing, and swimming pools. Water maintains operations in Huntsville, Alabama and various other locations in the United States, Sydney, New South Wales, Australia and Melbourne, Victoria, Australia (ADS products), Leeds, England (IETG products and services), Hirschegg, Austria, and Sulzberg, Germany (iPEK products), Lake Forest, California, Mississauga, Ontario, Canada, Eastbourne, East Sussex, England, Unanderra, Australia, and Ciudad Juarez, Chihuahua, Mexico (Knight products), Rochester, New York, Punta Gorda, Florida and Milan, Italy (Pulsafeeder products). Approximately 47% of Water�� sales during 2012 were to customers outside the United States.
Water Services & Technology (WST) consists of the Company�� ADS, IETG and iPEK businesses. WST is a provi! der of me! tering technology and flow monitoring products and underground surveillance services for wastewater markets. ADS�� products and services provide integrated solutions that enable industry, municipalities and government agencies to analyze and measure the capacity, quality and integrity of wastewater collection systems, including the maintenance and construction of such systems. IETG�� products and services enable water companies to manage their water distribution and sewerage networks, while its surveillance service specializes in underground asset detection and mapping for utilities and other private companies. iPEK supplies remote controlled systems used for infrastructure inspection. WST maintains operations in Huntsville, Alabama and various other locations in the United States and Australia (ADS products and services); Leeds, England (IETG products and services); and Hirschegg, Austria, and Sulzberg, Germany (iPEK products). Approximately 40% of WST�� 2012 sales were to customers outside the United States.
The Company competes with Pump Solutions Group, Dover Corporation, Milton Roy and Tuthill Corporation.
Health & Science Technologies Segment
The Health & Science Technologies Segment designs, produces and distributes a range of precision fluidics, rotary lobe pumps, centrifugal and positive displacement pumps, roll compaction and drying systems used in beverage, food processing, pharmaceutical and cosmetics, pneumatic components and sealing solutions, including pumping solutions required in analytical instrumentation, clinical diagnostics and drug discovery, molded and extruded, biocompatible medical devices and implantables, air compressors used in medical, dental and industrial applications, optical components and coatings for applications in the fields of scientific research, defense, aerospace, telecommunications and electronics manufacturing, laboratory and commercial equipment used in the production of micro and nano scale materials, precision pho! tonic sol! utions used in life sciences, research and defense markets, and precision gear and peristaltic pump technologies. The segment accounted for 35% of IDEX�� sales and 35% of operating income in 2012, with approximately 54% of its sales to customers outside the United States.
IH&S consists of Eastern Plastics, Rheodyne, Ismatec, Sapphire Engineering, Upchurch Scientific and ERC, which was acquired in April 2012. IH&S has facilities in Rohnert Park, California (Rheodyne products); Bristol, Connecticut (Eastern Plastics products); Wertheim-Mondfeld, Germany (Ismatec products); Middleboro, Massachusetts (Sapphire Engineering products); Oak Harbor, Washington (Ismatec and Upchurch Scientific products); and Kawaguchi, Japan (ERC products). Eastern Plastics products, which consist of high- precision integrated fluidics and associated engineered plastics solutions, are used in a set of end markets including medical diagnostics, analytical instrumentation, and laboratory automation. Rheodyne products consist of injectors, valves, fittings and accessories for the analytical instrumentation market. Rheodyne products are used by manufacturers of high pressure liquid chromatography equipment servicing the pharmaceutical, biotech, life science, food & beverage, and chemical markets. Ismatec products include peristaltic metering pumps, analytical process controllers, and sample preparation systems. Sapphire Engineering and Upchurch Scientific products consist of fluidic components and systems for the analytical, biotech and diagnostic instrumentation markets, such as fittings, precision-dispensing pumps and valves, tubing and integrated tubing assemblies, filter sensors and other micro-fluidic and nano-fluidic components, as well as advanced column hardware and accessories for the high performance liquid chromatography (HPLC) market. Sapphire Engineering and Upchurch Scientific products primarily serve the pharmaceutical, drug discovery, chemical, biochemical processing, genomics/proteomics research, envir! onmental ! labs, food/agriculture, medical lab, personal care, and plastics/polymer/rubber production markets. ERC manufactures gas liquid separations and detection solutions for the life science, analytical instrumentation and clinical chemistry markets. ERC�� products consist of in-line membrane vacuum degassing solutions, refractive index detectors and ozone generation systems. Approximately 52% of IH&S�� 2012 sales were to customers outside the United States.
IOP consists of CVI Melles Griot (CVI MG), Semrock and AT Films (the Precision Photonics portion of the AT Films business was acquired in April 2012). CVI MG is a into design and manufacture of precision photonic solutions used in the life sciences, research, semiconductor, security and defense markets. CVI MG�� products are focused on the generation, control and productive use of light for a variety of key science and industrial applications. Products consist of specialty lasers and light sources, electro-optical components, specialty shutters, opto-mechanical assemblies and components. In addition, CVI MG produces critical components for life science research, electronics manufacturing, military and other industrial applications including lenses, mirrors, filters and polarizers. These components are utilized in a number of applications such as spectroscopy, cytometry (cell counting), guidance systems for target designation, remote sensing, menology and optical lithography.
CVI MG is headquartered in Albuquerque, New Mexico, with additional manufacturing sites located in Carlsbad, California; Rochester, New York; Isle of Man, British Isles; Leicester, England; Kyongki-Do, Korea; Tokyo, Japan; Didam, The Netherlands; and Singapore. Semrock is a provider of optical filters for biotech and analytical instrumentation in the life sciences markets. Semrock�� optical filters are produced using state-of-the-art manufacturing processes which enable it to offer its customers improvements in instrument performance and reliability.! Semrock ! is located in Rochester, New York. AT Films specializes in optical components and coatings for applications in the fields of scientific research, defense, aerospace, telecommunications and electronics manufacturing. The Precision Photonics portion of its business specializes in optical components and coatings for applications in the fields of scientific research, aerospace, telecommunications and electronics manufacturing. AT Films is headquartered in Boulder, Colorado. Approximately 57% of IOP�� 2012 sales were to customers outside the United Sates.
Containment consists of Precision Polymer Engineering (PPE). PPE, which is located in Blackburn, England, is a provider of high performance seals and advanced sealing solutions for a diverse range of global industries and applications, including hazardous duty, analytical instrumentation, semiconductor/solar, process technologies, pharmaceutical, electronics, and food applications. Approximately 79% of PPE�� 2012 sales were to customers outside the United States.
Gast consists of the Company�� Gast and Jun-Air businesses. The Gast business is a manufacturer of air-moving products, including air motors, low-range and medium-range vacuum pumps, vacuum generators, regenerative blowers and fractional horsepower compressors. Gast products are used in a variety of long-life applications requiring a quiet, clean source of moderate vacuum or pressure. Gast products primarily serve the medical equipment, environmental equipment, computers and electronics, printing machinery, paint mixing machinery, packaging machinery, graphic arts, and industrial manufacturing markets. The Jun-Air business is a provider of low-decibel, ultra-quiet vacuum compressors suitable for medical, dental and laboratory applications. Based in Benton Harbor, Michigan, Gast also has a logistics and commercial center in Redditch, England. Approximately 27% of Gast�� 2012 sales were to customers outside the United States.
Micropump, headquartered i! n Vancouv! er, Washington, produces, precision-engineered, magnetically and electromagnetically driven rotary gear, piston and centrifugal pumps. Micropump products are used in low-flow abrasive and corrosive applications. Micropump products primarily serve the printing machinery, medical equipment, paints and inks, chemical processing, pharmaceutical, refining, laboratory, electronics, pulp and paper, water treatment, textiles, peristaltic metering pumps, analytical process controllers and sample preparation systems markets. Approximately 77% of Micropump�� 2012 sales were to customers outside the United States.
MPT consists of Quadro, Fitzpatrick, Microfluidics and Matcon Group Limited (Matcon), which was acquired in July 2012. Quadro is a provider of particle control solutions for the pharmaceutical and bio-pharmaceutical markets. Based in Waterloo, Ontario, Canada, Quadro�� activities include fine milling, emulsification and special handling of liquid and solid particulates for laboratory, pilot phase and production scale processing within the pharmaceutical and bio-pharmaceutical markets. Fitzpatrick is into the design and manufacture of process technologies for the pharmaceutical, food and personal care markets. Fitzpatrick designs and manufactures customized size reduction, roll compaction and drying systems to support their customers��product development and manufacturing processes. Fitzpatrick is headquartered in Elmhurst, Illinois. Microfluidics is into designing and manufacturing of laboratory and commercial equipment used in the production of micro and nano scale materials for the pharmaceutical and chemical markets. Microfluidics is the producer of the Microfluidizer family of high shear fluid processors for uniform particle size reduction, robust cell disruption and nanoparticle creation. Microfluidics has offices in Newton, Massachusetts. Matcon is into material processing solutions for high value powders used in the manufacture of pharmaceuticals, food, plastics, and fine chemic! als.
!Matcon�� products consist of the original cone valve powder discharge system and filling, mixing and packaging systems, all of which support its customers��automation and process requirements. Matcon is located in Evesham, Worcestershire, England. Approximately 61% of MPT�� 2012 sales were to customers outside the United States.
The Company competes with Gardner Denver, Inc., Thermo Scientific Dionex, Gooch & Housego PLC, Parker Hannifin and Valco Instruments Co., Inc.
Fire & Safety/Diversified Products Segment
The Fire & Safety/Diversified Products segment produces firefighting pumps and controls, rescue tools, lifting bags and other components and systems for the fire and rescue industry, engineered stainless steel banding and clamping devices used in a variety of industrial and commercial applications, and precision equipment for dispensing, metering and mixing colorants and paints used in a variety of retail and commercial businesses around the world. The segment accounted for 22% of IDEX�� sales and 53% of IDEX�� operating income in 2012, with approximately 56% of its sales to customers outside the United States.
Fire Suppression consists of the Company�� Class I, Hale and Godiva businesses, which produce truck-mounted and portable fire pumps, stainless steel valves, foam and compressed air foam systems, pump modules and pump kits, electronic controls and information systems, conventional and networked electrical systems, and mechanical components for the fire, rescue and specialty vehicle markets. Fire Suppression�� customers are primarily OEMs. Fire Suppression is headquartered in Ocala, Florida (Class 1 and Hale products), with additional facilities located in Warwick, England (Godiva products). Approximately 41% of Fire Suppression�� 2012 sales were to customers outside the United States.
Rescue consists of the Company�� Dinglee, Hurst Jaws of Life, Lukas and Vetter businesses, which produce hydraulic! , battery! , gas and electric-operated rescue equipment, hydraulic re-railing equipment, hydraulic tools for industrial applications, recycling cutters, pneumatic lifting and sealing bags for vehicle and aircraft rescue, environmental protection and disaster control, and shoring equipment for vehicular or structural collapse. Rescue Tool�� customers are primarily public and private fire and rescue organizations. Rescue has facilities in Shelby, North Carolina (Hurst Jaws of Life products); Tianjin, China (Dinglee products); Erlangen, Germany (Lukas products); and Zulpich, Germany (Vetter products). Approximately 75% of Rescue�� 2012 sales were to customers outside the United States.
Band-It is a producer of stainless steel banding, buckles and clamping systems. Band-It products are used for securing exhaust system heat and sound shields, industrial hose fittings, traffic signs and signals, electrical cable shielding, identification and bundling, and in numerous other industrial and commercial applications. Band-It products primarily serve the automotive, transportation equipment, oil and gas, general industrial maintenance, electronics, electrical, communications, aerospace, utility, municipal and subsea marine markets. Band-It is based in Denver, Colorado, with additional operations in Staveley, Derbyshire, England, and a IDEX shared manufacturing facility in China. Approximately 39% of Band-It�� 2012 sales were to customers outside the United States.
Dispensing Equipment produces precision equipment for dispensing, metering and mixing colorants and paints used in a variety of retail and commercial businesses worldwide. Dispensing Equipment is a global supplier of precision-designed tinting, mixing, dispensing and measuring equipment for auto refinishing and architectural paints. Dispensing Equipment products are used in retail and commercial stores, hardware stores, home centers, department stores, automotive body shops as well as point-of-purchase dispensers. Dispensing Equipmen! t is head! quartered in Wheeling, Illinois with additional facilities in Sassenheim, The Netherlands; Unanderra, Australia; and Milan, Italy, as well as IDEX shared manufacturing facilities in India and China. Approximately 59% of Dispensing Equipment�� 2012 sales were to customers outside the United States.
The Company competes with American Cast Iron Pipe Company, Holmatro, Inc., Nordic Capital and Panduit Corporation.
Advisors' Opinion:- [By Ben Levisohn]
Xylem’s big day has also boosted other water-infrastructure stocks. Flowserve (FLS) has gained 1.2% to $70.59, Idex Corp. (IEX) has risen 0.5% to $68.69 and Thermo Fisher Scientific (TMO) has advanced 0.4% t0 $98.22.
- [By Damon Churchwell]
Lastly, a growth company�
The third example of a thriving flow technologies company is IDEX� (NYSE: IEX ) . This one is situated in a unique set of end markets, namely fluid & metering, health & science, and fire & safety/diversified. - [By Rich Duprey]
Diversified technology machinist�IDEX (NYSE: IEX ) announced yesterday its second-quarter dividend of $0.23�per share, the same rate it paid last quarter after raising the payout 15% from $0.20 per share.
Top Machinery Stocks To Watch For 2014: First Majestic Silver Corp.(AG)
First Majestic Silver Corp. engages in the production, development, exploration, and acquisition of mineral properties with a focus on silver in Mexico. The company owns interests in La Encantada Silver Mine comprising 4,076 hectares of mining rights and 1,343 hectares of surface land located in Coahuila; La Parrilla Silver Mine consisting of mining concessions covering an area of 69,867 hectares; and San Martin Silver Mine comprising approximately 7,841 hectares of mineral rights and approximately 1,300 hectares of surface land rights located in Jalisco. It also holds interests in Del Toro Silver Mine consisting of 393 contiguous hectares of mining claims and an additional 129 hectares of surface rights located in Zacatecas; Real de Catorce Silver Project comprising 22 mining concessions covering 6,327 hectares located in San Luis Potosi state; and Jalisco Group of Properties consisting of mining claims totalling 5,240 hectares located in Jalisco. The company was founded in 1979 and is headquartered in Vancouver, Canada.
Advisors' Opinion:- [By Zacks]
Originally posted here...
Most Popular Earnings Expectations For The Week Of July 14: Big Banks, Tech Giants And More GT Advanced Technologies Down Sharply On iPhone Production Concerns UPDATE: Barclays Upgrades Apple, Has High Expectations For Near Term Perrigo Rumored To Be On Block; 'Market Source' Sees 25% Premium 9 IPOs To Watch For This Week - [By Doug Ehrman]
Despite the weakness seen in precious metals a few weeks ago, silver has been relatively stable ever since mid-April, with the iShares Silver Trust (NYSEMKT: SLV ) trading in a dollar-wide range ever since. With the presidents of the Chicago and Philadelphia Federal Reserve banks��releasing conflicting statements, turmoil may be just around the corner. Miners like Pan American (NASDAQ: PAAS ) and First Majestic (NYSE: AG ) are still facing operating challenges, while silver streaming darling Silver Wheaton (NYSE: SLW ) struggles as well.
- [By Doug Ehrman]
While many precious-metals companies have been in a slump of late, there is one that belongs perpetually in your portfolio: Silver Wheaton (NYSE: SLW ) . The company is not like other miners -- including Pan American Silver (NASDAQ: PAAS ) and First Majestic (NYSE: AG ) -- in that it has a unique business plan that insulates it against many of the vagaries of the mining business. Moreover, because silver will always have a significant industrial demand component, even with the heightened volatility you see in the silver market, maintaining exposure to silver is appropriate.
Top Machinery Stocks To Watch For 2014: Boewe Systec AG (BSY)
BOEWE SYSTEC AG is a Germany-based provider of paper management systems. The Company is primarily engaged in the production of inserting systems, for the secure distribution of printed documents and plastic cards. Its product portfolio also includes plastic card personalization and mailing solutions, software for the monitoring and interconnection of various mailroom systems, paper processing solutions, sorting and mail verification systems, and scanners. The Company developed reading technologies used for cutters, cut sheet feeders, enclosure feeders and inserting systems, which are integrated into its software solutions. BOEWE SYSTEC AG�� products are modular, allowing machinery from different manufacturers to be connected into a production line, offering solutions for the automated mailroom. In addition, the Company provides installation, commissioning and maintenance services, as well as spare parts for its products. Advisors' Opinion:- [By Inyoung Hwang]
BSkyB (BSY) sank 3.3 percent to 822 pence, the biggest slide since May 16, even as the U.K.�� largest pay-TV broadcaster reported sales that topped estimates. The company unveiled a box to link televisions to the Internet and said it will buy back 500 million pounds of shares.
Top Machinery Stocks To Watch For 2014: Titan Machinery Inc (TITN)
Titan Machinery Inc., incorporated in 1980, owns and operates a network of agricultural and construction equipment stores in the United States and Europe. The Company is a retail dealer of Case IH Agriculture equipment and a retail dealer of New Holland Agriculture, Case Construction and New Holland Construction equipment in the United States. It operates in two segments: Agriculture and Construction. The agricultural equipment, which it sells and services includes machinery and attachments for uses ranging from large-scale farming to home and garden use. The construction equipment it sells and services includes heavy construction and light industrial machinery for commercial and residential construction, road and highway construction and mining. On February 28, 2011, it acquired certain assets of Tri-State Implement, Inc. On March 31, 2011, the Company acquired interest in Schoffman's Inc. In July 2012, the Company acquired Curly Olney��, Inc. and opened two Case IH dealerships in Cluj and Roman, Romania. In November 2012, the Company acquired Falcon Power Inc. In December 2012, the Company acquired VAIT D.o.o. In February 2013, it acquired Tucson Tractor Company. In March 2013, it acquired Adobe CE, LLC, consisting of one Case Construction equipment dealership located in Albuquerque, New Mexico.
On April 1, 2011, the Company acquired certain assets of ABC Rental & Equipment Sales. On May 13, 2011, the Company acquired certain assets of Carlson Tractor & Equipment, Inc. On May 31, 2011, the Company acquired certain assets of St. Joseph Equipment Inc. On September 2, 2011, the Company acquired certain assets of Virgl Implement Inc. On September 2, 2011, the Company acquired certain assets of Victors Inc. On November 1, 2011, the Company acquired certain assets of Van Der Werff Implement, Inc. On December 1, 2011, the Company acquired certain assets of Jewell Implement Company, Inc. On December 23, 2011, the Company, through a newly formed subsidiary, Titan Machinery Romania, S.R.L., ac! quired certain assets of AgroExpert Capital S.R.L. On February 27, 2012, the Company acquired certain assets of the Colorado division of Adobe Truck & Equipment, LLC. On March 5, 2012, the Company acquired certain assets of Rimex 1-Holding EAD. On March 30, 2012, the Company acquired certain assets of Haberer's Implement, Inc. On April 2, 2012, the Company acquired certain assets of East Helena Rental, LLC.
Equipment Sales
The Company sells agricultural and construction equipment manufactured under the CNH family of brands, as well as equipment from a variety of other manufacturers. The used equipment it sells is from inventory acquired through trade-ins from its customers and selective purchases. The agricultural equipment, which it sells and services includes application equipment and sprayers, combines and attachments, hay and forage equipment, planting and seeding equipment, precision farming technology, tillage equipment and tractors. The construction equipment, which the Company sells and services includes articulated trucks, compact track loaders, compaction equipment, cranes, crawler dozers, excavators, forklifts, loader/backhoes, loader/tool carriers, motor graders, skid steer loaders, telehandlers and wheel loaders. The Company also sells used equipment through its outlet stores.
Parts Sales
The Company sells a range of maintenance and replacement parts on equipment that it sells, as well as other types of equipment. It maintains an in-house parts inventory to provide parts, and repair and maintenance support to its customers.
Repair and Maintenance Services
The Company provides repair and maintenance services, including warranty repairs, for its customers equipment. In addition, the Company provides customer service by maintaining service histories for each piece of equipment owned by its customers, maintaining around-the-clock service hours, providing on-site repair services, scheduling off-season maintenance acti! vities wi! th customers, notifying customers of periodic service requirements and providing training programs to customers.
Equipment Rental and Other Business Activities
The Company rents equipment to its customers on a short-term basis for periods ranging from a few days to a few months. In addition, the Company provides ancillary equipment support activities, such as equipment transportation, global positioning system (GPS) signal subscriptions in connection with precision farming and reselling CNH Capital finance and insurance products.
The Company competes with RDO Equipment Co., Butler Machinery, Ziegler Inc. and Brandt Holdings Co.
Advisors' Opinion:- [By Rick Munarriz]
I went out on a limb last week, and now it's time to see how that decision played out.
I predicted that Titan Machinery (NASDAQ: TITN ) would close lower on the week. The specialty retailer of agricultural and construction equipment has been disappointing on the bottom line in recent quarters, and analysts were expecting Titan to post its first quarterly deficit since going public six years ago come Thursday. It did. The stock declined 0.5% on the week. I was right. I predicted that the tech-heavy Nasdaq would outperform the Dow Jones Industrial Average. (DJINDICES: ^DJI ) . This has been a tricky call lately, so how did it play out this time? Well, the market saved itself by rallying on Friday. The Nasdaq moved 0.4% higher on the week. The Dow managed to close 0.9% lower. I was wrong. My final call was for Francesca's Holdings (NASDAQ: FRAN ) to beat Wall Street's income estimates in its latest quarter. The rapidly expanding boutique operator has been posting blowout quarterly results over the past year, and I was banking on seeing the trend continue. Analysts were looking for a profit of $0.26 a share during the quarter, and it merely matched that target. That was close, but not what I had predicted. I was wrong.One out of three? Bummer! I was an impressive 16 out of 18 over the six previous weeks.
- [By Rick Munarriz]
1. Titan Machinery will close lower on the week
Titan Machinery (NASDAQ: TITN ) is in a slump. Analysts have been slashing their projections for the specialty retailer of agricultural and construction equipment. One would think that construction would be on the rise given the housing boom. An improving economy should benefit farmers. However, Titan Machinery isn't cashing in on the trends.
Top Machinery Stocks To Watch For 2014: Blount International Inc (BLT)
Blount International, Inc. (Blount) is a global industrial company. The Company designs, manufactures, and markets equipment, replacement and component parts, and accessories for professionals and consumers. The Company operates in two segments: Forestry, Lawn, and Garden (FLAG) segment and Farm, Ranch, and Agriculture (FRAG). It also manufactures and markets such items to original equipment manufacturers (OEMs) under private label brand names. The Company specializes in manufacturing cutting parts and equipment used in forestry, lawn and garden; farming, ranching, and agricultural, and construction applications. Blount also purchases products manufactured by other suppliers that are aligned with the markets it serves and markets them, under one of its brands, through its global sales and distribution network. Its products are sold in over 115 countries and approximately 63% of the Company�� sales were made outside of the United States during the year ended December 31, 2011. It has manufacturing operations in the United States, Brazil, Canada, China, France, and Mexico. In addition, it operates marketing, sales, and distribution centers in Asia, Europe, North America, and South America.
On March 1, 2011, through its indirect wholly owned subsidiary Blount Netherlands B.V. (Blount B.V.), the Company acquired KOX GmbH and related companies (collectively KOX), a Germany-based direct-to-customer distributor of forestry-related replacement parts and accessories, primarily serving professional loggers and consumers in Europe. On August 5, 2011, through Blount Holdings France SAS, it acquired Finalame SA, which included PBL SAS and related companies (collectively PBL). On September 7, 2011, through its indirect wholly owned subsidiary SP Companies, Inc., the Company acquired GenWoods HoldCo, LLC and its wholly owned subsidiary, Woods Equipment Company (collectively Woods/TISCO). Woods/TISCO is a manufacturer and marketer of tractor attachments, implements, and replacement parts, primarily for! the agriculture, ground maintenance, and construction end markets.
Forestry, Lawn, and Garden Segment
The FLAG segment, manufactures and markets cutting chain, guide bars, and drive sprockets for chain saw use, and lawnmower and edger blades for outdoor power equipment. The FLAG segment also purchases replacement parts and accessories from other manufacturers and markets them, primarily under its brands, to its FLAG customers through the Company�� global sales and distribution network. The FLAG segment includes the operations of the Company that has served the forestry, lawn, and garden markets, as well as Carlton, KOX, and a portion of the PBL business. Its Forestry Products are sold under the Oregon, Carlton, KOX, Tiger, and Windsor brands, as well as under private labels for some of its OEM customers. Manufactured product lines include a range of cutting chain, chain saw guide bars, and cutting chain drive sprockets used on portable gasoline and electric chain saws and on mechanical timber harvesting equipment. The Company also purchases and markets replacement parts and other accessories for the forestry market, including small chain saw engine replacement parts, safety equipment and clothing, lubricants, maintenance tools, hand tools, and other accessories used in forestry applications. In 2011, the Company marketed a line of cordless electric chain saws under the Oregon PowerNow brand.
Blount�� lawn and garden products are sold under the Oregon and PBL brand names, as well as private labels for some of its OEM customers. Manufactured product lines include lawnmower and edger cutting blades designed to fit a variety of machines and cutting conditions. It also purchases and markets various cutting attachments, replacement parts, and accessories for the lawn and garden market, such as cutting line for line trimmers, air filters, spark plugs, lubricants, wheels, belts, grass bags, maintenance tools, hand tools, and accessories to service the lawn and garde! n equipme! nt industry. Its FLAG products are sold under both its own brands and private labels to OEMs for use on new chain saws and lawn and garden equipment, and to professionals and consumers as replacement parts through distributors, dealers, direct sales companies, and mass merchants. During 2011, approximately 21% of the FLAG segment�� sales were to OEMs, with the remainder sold into the replacement market.
The Company competes with Ariens, Briggs & Stratton, Fisher Barton, Husqvarna, Jaekel, John Deere, MTD, Northern Tool, Rotary, Stens, Stihl and TriLink.
Farm, Ranch, and Agriculture Segment
The Company�� FRAG segment manufactures and markets attachments and implements for tractors in a variety of mowing, cutting, clearing, material handling, landscaping and grounds maintenance applications, as well as log splitters, post-hole diggers, self-propelled lawnmowers, attachments for off-highway construction equipment applications, and other general purpose tractor attachments. In addition, the FRAG segment manufactures a variety of attachment cutting blade parts. The FRAG segment also purchases replacement parts and accessories from other manufacturers that the Company markets to its FRAG customers through its sales and distribution network. The FRAG segment includes the operations of SpeeCo, Woods/TISCO, and a portion of the PBL business.
Its equipment and tractor attachment products are sold under the Alitec, CF, Gannon, Oregon, PowerPro, SpeeCo, WainRoy, and Woods brand names, as well as under private labels for some of its OEM and retail customers. Product lines include attachments for tractors in a variety of mowing, cutting, clearing, material handling, landscaping and grounds maintenance applications, as well as log splitters, post-hole diggers, self-propelled lawnmowers, snow blowers, attachments for off-highway construction equipment applications, and other general purpose tractor attachments. OEM and aftermarket parts are sold under the PBL, Sp! eeCo, TIS! CO, Tru-Power, Vintage Iron, and WoodsCare brand names, as well as under private labels for some of its OEM customers. The FRAG segment manufactures a variety of attachment cutting blade component parts sold to OEM customers for inclusion in original equipment, and as replacement parts. The FRAG segment also markets replacement parts and accessories purchased from other manufacturers, including tractor linkage, electrical, engine and hydraulic replacement parts, and other accessories used in the agriculture and construction equipment markets.
The Company competes with Alamo Group, Champion, Doosan, Dover, Great Plains, Hope Haven, John Deere, Koch Industries, MTD, Swisher, A&I, Herschel, Kondex, Rasspe, SMA and Sparex.
Concrete Cutting and Finishing Products
The Company operates a business in the specialized concrete cutting and finishing market. These products are sold primarily under the ICS brand. The principal product is a diamond-segmented chain, which is used on gasoline and hydraulic powered concrete cutting saws and equipment. It also markets and distributes gasoline and hydraulic powered concrete cutting chain saws to its customers, which include contactors, rental equipment companies, and construction equipment dealers primarily in the United States and Europe. The power heads for these saws are manufactured by a third party.
The Company competes with Husqvarna and Stihl.
Advisors' Opinion:- [By Corinne Gretler]
BHP Billiton (BLT) dropped 3.4 percent to 1,779 pence. Output of iron ore, its biggest earner, was 40.2 million metric tons in the three months to March 31, missing the median estimate of 42.3 million tons in a Bloomberg survey.
- [By Caroline Bennett]
Blount (NYSE: BLT ) took a few hits in this quarter's earnings report, which was released today. Sales were down 1% compared to Q3 2012, to $230.6 million, and the replacement parts manufacturer also took a $5.1 million restructuring charge for consolidating two facilities in Portland, Ore.
- [By Corinne Gretler]
BHP Billiton Ltd. (BLT) rose 4.1 percent to 1,950.5 pence after the world�� largest mining company upgraded its projection for full-year iron-ore production to 212 million tons from its earlier forecast of 207 million tons.
Top Machinery Stocks To Watch For 2014: Heidelberger Druckmaschinen AG (HDD)
Heidelberger Druckmaschinen AG is a German producer of solutions for the print media industry. The Company divides its activities into the three business segments Heidelberg Equipment, Heidelberg Services as well as Heidelberg Financial Services. Its product portfolio includes the prepress area with the Suprasetter product family; the press area, which comprises Speedmaster product families, that are used for classical offset printing, as well as for special applications, such as ultraviolet (UV) printing; as well as the postpress area, that includes cutters, folders, saddle stitchers, adhesive binders, die-cutting products, folding carton gluing machines and label systems. The Company also offers a range of spare parts and used equipment, as well as training programs and its own printing process automation software, Prinect. As of December 31, 2011, the Company operated three domestic subsidiaries and a number of foreign subsidiaries in Europe, Africa, Asia and Brazil, among others. Advisors' Opinion:- [By ICRAOnline]
Second-quarter revenue dropped 3.8% to $3.53 billion due to weakening hard disk drive (HDD) demand, reflecting the continuous slump in the PC industry. And even though low-cost and reliable HDDs are demanded by the burgeoning cloud storage space, Seagate�� high-margin HDD sales were poorer than expectations. On the flip side, demand for HDDs from consumer electronics, external storage and network-attached storage areas progressed well.
No comments:
Post a Comment